| Mfg Part Number: WRS1G040S103B | NSN : 5905-01-348-9960 | NIIN : 013489960 |
| CAGE Code : 12697 | Manufacturer: Clarostat Sensors And Controls | Item Name : Resistor Variable N |
| FSC : 5905 Resistors |
If you are looking for Resistor Variable N components with the NSN part WRS1G040S103B, we have your back at After Market Aviation Spares. The NSN 5905-01-348-9960 has been produced by Clarostat Sensors And Controls and is available for purchase on our website. If you want to learn more about this NSN part number WRS1G040S103B, we invite you to fill out our RFQ form. Once we receive the form, a dedicated expert from our team will reach out to you with a personalized quote within 15 minutes or less. At After Market Aviation Spares, our dedicated account managers are committed to helping you find the right products at the best prices available in the market.
We go the extra mile to provide you with high-caliber, high-performing products with every purchase. We are the only independent distributor in the country with a strict NO CHINA SOURCING pledge, and we only offer products, parts, and components from reliable manufacturers like Clarostat Sensors And Controls. Moreover, as part of the ASAP family, we operate as an AS9120B, ISO 9001:2015, and FAA AC 00-56B accredited company. Make us your strategic sourcing partner by starting the purchasing process for the NSN part WRS1G040S103B with the CAGE Code 12697 and NSN 5905-01-348-9960 today.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-348-9960 Item Description: Resistor Variable N | 5905 | 013489960 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Wrs1g040s103b | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 292.0 MINIMUM AND 298.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 13.00 INCH-OUNCES |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | PANEL SEAL AND SWITCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 255.0 MINIMUM AND 265.0 MAXIMUM |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0 TO 5.0 -55 DEG CELSIUS SINGLE SECTION AND +0.0 TO 4.0 -40 DEG CELSIUS SINGLE SECTION AND +0.0 TO 2.0 0 DEG CELSIUS SINGLE SECTION AND -2.5 TO 2.5 85 DEG CELSIUS SINGLE SECTION AND -3.0 TO 3.0 105 DEG CELSIUS SINGLE SECTION AND -4.0 TO |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 1.000 AC |
| TEST | TEST DATA DOCUMENT | 37695-228092 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |
| AEFL | MAXIMUM RUNNING TORQUE | 13.00 INCH-OUNCES |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | REAR-BOTTOM |
| CBME | III CUBIC MEASURE | 0.159 CUBIC INCHES |
| FEAT | SPECIAL FEATURES | TERMINAL LUGS EXITING THE SIDE OF THE PART BODY RATHER THAN THE END |
| AAPN | SECTION QUANTITY | 1 |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFN | NONTURN DEVICE LOCATION | AT 10'30 OCLOCK |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | III END ITEM IDENTIFICATION | 5895-01-166-6949 DISPLAY BOARD,COMBAT INFORMATION CENTRAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.812 INCHES MAXIMUM |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 125.0 |
| AEFM | MAXIMUM STOP TORQUE | 32.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.245 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
Cost Effective
Warrantied inventory at competitive prices
Quick Search
Search the world's largest inventory of electronic components by manufacturer, category or part number
Fastest Delivery
All inventory ready to ship from our sellers
Quality Assured
We sell only warrantied and traceable parts
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
